Aqara Smart Lock D200i

Aqara Smart Lock D200i

Installation Method: Will Replace Your Current Door Handle

Functions: Door lock can be unlocked using 9 modes

1. Face Unlock
2. password
3. one-time password
4. BLE Unlock
5. NFC card
6. mechanical key
7. Aqara Home app
8. App remote
9. HomeKit 

*Facial Recognition: 

●Face recognition

1. Overview of facial modules
• Developed for facial recognition applications in the intelligent door lock industry;
• A low-power 3D face recognition face module that integrates low-power Alot
algorithm chips, 3D structured light camera modules, 3D face recognition algorithms,
and low-power proximity sensors;

2. Module customization
• Low power 3D structured light camera module;
• Short range LDP protection capability;
• Advanced 3D facial anti-counterfeiting and recognition algorithms;
• Technological appearance design;
• High quality surface technology;

3. Algorithm development
• Security: Comparable to non universal algorithms, deeply involved in algorithm security, and able to cope with complex network environments. The
subsequent risks are controllable;
• Strong scalability;

●AIOT & Homekit smart Linkage

•Connecting to Aqara Home (supporting both Chinese and English) with ZigBee hub can link rich Aqara smart products, set automation and scenarios;
•User management can be carried out through Aqara Home, including adding/deleting users, changing user permissions, adding/deleting fingerprints, setting passcodes, and adding NFC cards;
•View logs, remotely view door lock information, etc; Receive push notifications of door lock alarm alarms;
•Can be unlocked/unlocked through Homekit;
•Automation and scenarios can be set up through HomeKit*
•User management can be achieved through the Aqara Home app, including adding/deleting users, setting user credentials, changing user permissions,etc.,with excellent user experience design;
•User identity is divided into administrator and ordinary user;
Ordinary user permissions: can only unlock daily;
Administrator users: In addition to daily unlocking, they can set door locks, unlock and unlock, and reset door locks;

●Hardware security support

•Having oblique, angular, and square tongues;
•Full locking tongue status detection;
It can be determined that the door is not closed, the door is ajar, the door is unlocked, the door is locked, and the indoor door is opened;
•Adopting a direct plug-in C-level lock cylinder;
Even if the front panel is damaged or disassembled, it still faces a complete door with a C-level lock cylinder installed;
The rating standards for lock cylinders in GA/T 73-2015 "Mechanical Anti Theft Locks" are divided into three levels: A,B, and C, with safety C>B>A;
•There is an anti disassembly detection press switch on the back of the front panel. Normally, the press piece is in the press state. When someone disassembles the panel, the press piece detaches from the door body, causing the press to release,resulting in a signal, door lock sound and light alarm, and push it to the mobile app;
•Automatically lock after closing the door, ensuring safety in one step;
•Anti tailgating door opening;
•In the anti lock state, non administrator identities cannot unlock, and only
administrators are allowed to verify unlocking and open doors;
•Indoor unlocking is not affected;
•Some smart locks have a main control chip that controls unlocking on the front panel. After opening the front panel, it can provide a signal to the lock body to control the clutch to close and unlock;
•The programs for verifying various unlocking methods and controlling unlocking of the door lock are all running in the main control of the rear panel, and the driving circuit for unlocking is also on the circuit board of the rear panel. Even after the front panel is damaged or disassembled, the lock cannot be unlocked;

●Software security support

•When the distance between the current panel and the door surface is too large, the door lock sound and light alarm will be triggered, and the app will push a remote alarm, which can also be linked to the hub or other devices for alarm;
•When fingerprint, passcode, and NFC card verification fail multiple times, all verification methods will be locked for 3 minutes. When locked, push a message to the mobile app to inform the user;
•When the battery level is less than 20%, every time the lock is unlocked, it reminds that the battery level is low;
•When the door lock detects a false door through the bolt, there is a sound effect and light alarm, and the alarm information is simultaneously pushed to the mobile app to inform the user;

Aqara Smart Lock D200i
front panel：406mm x 77mm x 20mm
rear panel：406mm x 77mm x 26mm

Price includes:

- 2 Years Onsite Warranty
- Free Installations
- GST Absorbed

Hoz's Pro Tip to protect your Digital Lock 

Install door closer to protect your digital lock from door slamming; warranty will be voided as a result of door slamming